Microfiber Polishing, Wax & Dashboard Applicator Pad

Microfiber Polishing, Wax & Dashboard Applicator Pad

A good applicator pad makes it easier to spread polish and care products by hand. This microfiber pad has a relatively firm foam core to support your grip, while the outer fabric carries the product onto the working area. Work in small sections for a thin, even application.

The 80% polyester, 20% polyamide microfiber surface can be used for compounding and polishing bodywork. On plastic trim, use it to spread suitable dashboard care products. Taking a controlled amount of product onto the pad makes it easier to avoid applying too much over a large area at once.

For ceramic coatings, follow the product's recommendations for the pad and application method; working time varies with the chemical. Use separate pads for different care products to avoid carrying residue from an earlier application onto the surface. Wash with clean water before first use and start each new application with a clean outer surface.

Key Features

• Outer Fabric: 80% polyester, 20% polyamide microfiber
• Relatively firm inner foam
• Manual application of polish and care products
• For use with suitable products on bodywork and plastic components

Use and Care

1. Wash with clean water before first use. Make sure both the surface and pad are free of dirt.
2. Use a small amount of product and spread evenly without excessive pressure.
3. Use separate pads for different care products. Clean and dry the pad after use.
4. Do not reuse the pad on paintwork if ceramic coating residue has hardened.