Ultra Gloss Care Wash Kit

Ultra Gloss Care Wash Kit

Ultra Gloss Care Wash Kit brings paintwork gloss and clean glass into focus after a thorough wash. Wax shampoo, a wash mitt, a plush drying towel, a glass cloth and finishing products cover the successive stages of exterior cleaning in one set. It is a well-equipped combination for anyone who enjoys spending time on their car's appearance.

Apply BRIGHT's wash-and-wax formula with CHROMITT, then move on to the 1300 GSM REİS Large towel. Thick microfiber provides a plush drying feel as it collects rinse water. Reserve SHINE for glass, while three SHALE cloths keep spreading GLARE quick detailer and final wiping organized. Separate tools for each stage make the transition from washing to finishing comfortable.

GLARE's gloss and water repellency complete the vivid appearance of clean paintwork. Use the kit on care days when you have time for drying and detailing as well as the wash itself. The large glass cloth and substantial towel make it easy to finish each surface, while separate polishing cloths let you focus on the final touch. The result is a vehicle whose paintwork and glass have received the same careful attention.

Kit Contents

• 1 REİS Large double-layer drying towel — 50 × 70 cm, 1300 GSM, yellow/grey.
• 1 CHROMITT microfiber wash mitt.
• 1 SHINE thick glass cloth — 50 × 70 cm, 300 GSM, grey.
• 1 SHALE 3-piece polishing cloth set — 40 × 40 cm, 320 GSM, anthracite (3 cloths).
• 1 GLARE Hydrophobic Ceramic-Effect Quick Detailer — 500 ml.
• 1 BRIGHT Hydrophobic Wash & Wax Shampoo — 1000 ml.

How to Use

1. Dilute BRIGHT with 50 ml in 10 liters of water. Wash the vehicle with suitable wash equipment and rinse with plenty of water.
2. Dry the vehicle with a clean REİS towel.
3. Shake GLARE, apply a small amount to the dry surface and spread with a clean microfiber polishing cloth.
4. Do not apply the detailer in direct sunlight. After GLARE, keep the surface away from water for at least 6 hours.

Usage note: Use each chemical according to the instructions and warnings on its own label. Avoid contact with skin and eyes; wear suitable protective gloves. Clean application tools after use.