BARON 2-Pack Microfiber Laser-Cut Polishing Towels 40x40 cm 500 GSM - Anthracite

BARON 2-Pack Microfiber Polishing Towels

Removing excess product after compounding and polishing is the step that reveals the final shine. BARON provides a thick, absorbent wiping surface with its dense 500 GSM microfiber. If you prefer a substantial polishing towel, its foldable format is comfortable to guide across the bodywork.

The anthracite towels measure 40 × 40 cm and contain 80% polyester and 20% polyamide. Ultrasonic-cut edges give you a soft fabric surface without a stitched border. Folding the used section inward and moving to a clean side makes it easier to keep collected residue from spreading back over the panel.

The two-piece pack is practical for separating the initial wipe from the final check or reserving one towel for each care product. BARON collects compound and polish residue to bring the shine into view. It can also be used for the wiping stage of a ceramic coating, following the coating's instructions. Its 500 GSM fabric brings a dense, thick texture to an easy-to-handle size.

Key Features

• Size: 40 × 40 cm
• Fabric Weight: 500 GSM
• Pack Contents: 2 towels, anthracite
• Ultrasonic-cut edges
• Fabric Composition: 80% polyester, 20% polyamide
• Microfiber fabric for removing compound and polish residue from car bodywork

Use and Care

1. Make sure the surface and towel are free of hard dirt particles.
2. Fold the towel and work through its clean sections while wiping with light pressure.
3. When using ceramic coatings, follow the product's wipe-off timing. Do not reuse a towel with hardened coating residue on paintwork.
4. Machine wash at a maximum of 30 °C; store clean and dry.